WWW.BRENTWOODMACHINE.COM

Sturdy cast iron construction with precision-machined column and table  
Quick position table mounted swiveling vise clamp accommodates angled work pieces  
Feed lever features size positions allowing for quick adjustments  
Table and fence tilt from 0 to 35° for angled mortises  
Gas cylinder controlled rack and pinion system for smooth head raising and lowering  
Hinged chuck door allows easy access for quick bit changes  
Quick adjust depth stop for uniform mortise depths  
Provided 5/8", 3/4" and 1-1/8" bushings allow multiple chisel shank sizes  
Handwheels control smooth linear and cross table motions  
Adjustable work stop for repeat cuts

• Part Number 1791264K
• Spindle Speed (RPM) 1725
• Swing (in) n.a.
• Chuck Size (in.) 1/2
• Chisel Capacity (in.) 1/4 - 1
• Chisel Shank Capacity (in.) 5/8 I.D., 3/4 I.D., 1-1/8 I.D.
• Head Stroke (in) 6
• Chisel Center to Fence (in.) 4
• Drilling Capacity (in.) n.a.
• Under Hold-Down (in.) n.a.
• Fence Size (L x H/in.) 4-1/2 x 20-1/4
• Base Size (in.) 14 x 16
• Base Overall Height (in.) 60
• Bushing Size (in.) 5/8, 3/4, 1-1/8
• Chisel Stroke Maximum (in.) n.a.
• Table Size (in.) 7 x 20-1/4
• Table Size Fully Extended (L x W/in.) n.a.
• Table Tilt (deg.) 0 to 35
• Table Travel -Longitudinal (in) 15-1/2
• Table Travel - Cross (in) 4
• Motor HP 1HP
• Motor Phase 1PH
• Motor Voltage 115/230V
• Prewired Prewired 115V
• Spindle Travel (in.) n.a.
• Spindle Distance to Table (max./in.) n.a.
• Spindle Speeds n.a.
• Amps n.a.
• Spindle Distance to Base (in.) n.a.
• Column Diameter (in.) n.a.
• Spindle Taper n.a.
• Chuck Distance to Table (in.) n.a.
• Chuck Distance to Base (in.) n.a.
• Chisel Stroke (in.) 10-3/4
• Head Travel (front to back/in.) n.a.
• Head Travel (left to right/in.) n.a.
• Maximum Work Piece Height (in.) n.a.
• Motor Amps 11/5.5
• Model Number 719T
• Brand Powermatic
• Overall Dimensions 21-1/4 x 21-5/8 x 74
• Height 74 inch
• Width 21.625 inch
• Length 21.25 inch
• Net Weight 276 pound