WWW.BRENTWOODMACHINE.COM

The Byrd® helical cutterhead with 98 four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems  
Powerful 3HP TEFC motor controlled with a magnetic switch for safety  
Three V-belts transfer maximum power to the cutterhead  
Serrated steel infeed roller and smooth steel outfeed roller allow for 1/8" maximum depth of cut and trouble free operation  
Large cast iron handwheel positions table quickly and easily  
Large, precision ground cast iron table and extensions provide maximum workpiece support

• Part Number 1791213
• Maximum Planing Width (in.) 14-7/8
• Maximum Planing Thickness (in.) 6
• Maximum Full Width Depth of Cut (in.) 1/8
• Maximum Depth of Cut (in.) 1/4
• Minimum Planing Length (in.) 8
• Cutterhead Diameter (in.) 2-7/8
• Cutterhead Speed (RPM) 4500
• Cuts Per Minute n.a.
• Feed Rate (FPM) 16 and 20
• Infeed Roller Diameter (in) 2.070
• Outfeed Roller Diameter (in) 2.070
• Number of Knives 98 four-sided inserts
• Table Size (in.) 15 x 48 (w/ extensions)
• Dust Port Diameter (OD/in.) 4
• Dust Collection Minimum CFM Required 800
• Blade Size n.a.
• Bed Rollers Adjustable from Front n.a.
• Readout Scale inch/metric
• Segmented Infeed Roller Diameter (in.) 2.070
• Table Height Adjust Manual n.a.
• Table Support 4 column
• Tool Supplied yes
• Column Diameter (in.) 2-3/16
• Distance Between Rollers - Center to Center (in.) n.a.
• Maximum Height of Rollers Parallel to Tabletop (in.) n.a.
• Movement - Horizontal (in.) n.a.
• Movement - Vertical (in.) n.a.
• Number of Speeds n.a.
• Range of Speeds (FPM) n.a.
• Rotation (Forward/Reverse) Fwd
• Swing (deg.) n.a.
• Movement - Vertical (in.) n.a.
• Maximum Opening (in.) n.a.
• Amps 15
• Planing Thickness Range (in.) n.a.
• Motor HP 3HP
• Motor Phase 1PH
• Motor Voltage 230V
• Prewired n.a.
• Model Number 15HH
• Brand Powermatic
• Overall Dimensions 48 x 28 x 43-1/2
• Height 43.5 inch
• Width 28 inch
• Length 48 inch
• Net Weight 507 pound

Two speed gearbox features automatic chain tensioner  
One-piece welded steel stand has built-in lockable casters  
Steel top-mounted return rollers speed repetitive cuts  
Angled dust chute with 4" port positions collection hose away from the work area while providing efficient chip and dust collection  
Table locks firmly in place, preventing movement during cutting  
Standard Equipment:  
3HP TEFC motor with magnetic controls  
Byrd® helical cutterhead with inserts  
4" diameter dust port  
Cast iron extension tables  
Closed stand with built-in casters