Join our mailing list!
You are here: Home > Powermatic
Find by Pricing
Below 1100 (10)
1100 to 1249.99 (5)
1250 to 2899.99 (7)
2900 and Above (13)
Choose a sub category:
Planers/Molders Sanders
Dust Collection Bandsaws
Jointers Shapers
Lathes Stock Feeders
Mortisers/Drill Press Tablesaws
Sort By:
Page of 2
PM1200 Air Filtration System PM701 Benchtop Deluxe Mortiser
Reg. Price: $521.00
Sale Price: $429.99
You save $91.01!
Reg. Price: $581.00
Sale Price: $479.99
You save $101.01!
Three-filter system includes a diffuser to disperse exhausted air  
Remote control operates on radio frequency for wider range of effectiveness  
Timer has nine settings, for up to nine hours of continuous operation  
Inner filter has fine mesh pockets for high efficiency, can be blown or washed clean  
Electrostatic outer filter is disposable  
Four eye bolts allow suspension from shop ceiling  
Indicator lights up after 200 hours to remind user to replace filters  
Three blower speeds to modify air flow  
Filter guards snap on and off easily for quick access to filters  
Two carry handles for portability  
Fully enclosed motor has overload protection for long service life. 		In-line depth stop allows stopping at pre-set depths without racking the bit to the base  
Heavy-duty reversible handle can be installed to either side of the head without tools  
Stock hold-down with a double lock system, top and side, to eliminate slippage of workpiece  
Quick action cam lock will quickly lock fence in position with one 90° movement  
2 integrated bit and chisel spacers for quick set up  
Large work surfaces on both table and fence for greater stability and accuracy  
Large, hinged chuck door with magnetic catch for rapid access to the chuck  
Rack and pinion design for simple fence adjustments  
Standard Equipment:  
Integrated chisel and tool holder with sharpening stone  
1/2" drill chuck with 4" chuck key  
Removable safety switch key
PM1300 Dust Collector, 1.75HP 1PH, with Bag Filter Kit PM1900 Dust Collector, 3HP 1PH, with Bag Filter Kit
Reg. Price: $902.00
Sale Price: $519.99
You save $382.01!
Reg. Price: $1,234.00
Sale Price: $999.00
You save $235.00!
Remote-controlled digital timer can be programmed for up to 99 minutes  
All-metal duct construction for rigidity and improved air flow  
Dual 4" dust ports for simultaneous collection from two machines  
1-3/4HP motor offers plenty of power for effective air movement  
Cloth collection bag with view window uses snap ring for rapid installation/removal  
10 cubic feet capacity collection bag reduces number of bag changes.  
Tall filter bag requires less cleaning due to the larger surface area  
Four swivel casters for shop maneuverabilty  
Standard Equipment:  
1-3/4HP TEFC motor  
Remote control  
Cloth filter bag with strap  
Cloth collection bag  
Swivel casters  
Dual 4” dust port 		Remote-controlled digital timer can be programmed for up to 99 minutes  
All-metal duct construction for rigidity and improved air flow  
30-micron filter bags for improved capture of fine dust particles  
The large impeller is powered by a 3HP motor for peak performance  
Triple 4” dust ports allow for several hoses to be attached at the same time  
Cloth colllection bags with view window use a snap ring for rapid installation/removal  
10 cubic feet collection bag capacity uces number of bag changes.  
Tall filter bags require less cleaning due to the larger surface area  
Four swivel casters for shop maneuverability  
Standard Equipment:  
3HP TEFC motor  
Remote control  
Magnetic starter  
2 Cloth filter bags with straps  
2 Cloth collection bags  
Swivel casters  
Triple 4” dust port
PF-33 Powerfeeder, 1HP, 3Ph, 230V, 4-Speed, 3 Wheel PM1900 Dust Collector, 3HP 3PH, with Bag Filter Kit
Reg. Price: $1,208.00
Sale Price: $999.99
You save $208.01!
Reg. Price: $1,208.00
Sale Price: $999.99
You save $208.01!
Roller chain and sprockets provide positive feeding for a variety of work  
Support column is fully adjustable for horizontal, vertical or angled feeder position  
Feeder body, column base and joints are cast iron for heavy duty operation  
Rollers can be changed out easily and quickly 		30-micron filter bags for improved capture of fine dust particles  
All-metal duct construction for rigidity and improved air flow  
Powerful 3HP motor powers the large impeller for peak performance  
Triple 4” dust ports allow for several hoses to be attached at the same time  
Quick connect collection bags with view window don’t require straps  
10 cubic feet capacity reduces number of bag changes.  
Tall filter bags require less cleaning due to the larger surface area  
Four swivel casters make the unit easy to maneuver around the shop  
Standard Equipment:  
3HP TEFC motor  
2 Cloth filter bags with straps  
2 Cloth collection bags  
Swivel casters  
Triple 4” dust port
54A 6" Jointer with Quick-Set Knives PF-31 Powerfeeder, 1HP, 1Ph, 115V, 4-Speed, 3 Wheel
Reg. Price: $1,208.00
Sale Price: $999.99
You save $208.01!
Reg. Price: $1,328.00
Sale Price: $1,099.99
You save $228.01!
The cutterhead features three auto-set knives that automatically align themselves in the cutterhead  
66" long adjustable infeed and outfeed tables provide more working surface  
Fine/quick adjustment lever on infeed table for precision cuts  
Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts  
Enlarged sheet metal stand provides a sturdy base  
1HP motor offers plenty of power  
Built-in ledge for 1/2" rabbeting capacity  
Fence controls are center-mounted for convenience  
Push button switch is lockable to prevent accidental starting  
4" port for dust collection 		Roller chain and sprockets provide positive feeding for a variety of work  
Support column is fully adjustable for horizontal, vertical or angled feeder position  
Feeder body, column base and joints are cast iron for heavy duty operation  
Rollers can be changed out easily and quickly
PF-43 Powerfeeder, 1HP, 3Ph, 230V, 4-Speed, 4 Wheel PM2800, 18" Variable Speed Drill Press
Reg. Price: $1,328.00
Sale Price: $1,099.99
You save $228.01!
Reg. Price: $1,329.00
Sale Price: $1,099.99
You save $229.01!
Roller chain and sprockets provide positive feeding for a variety of work  
Support column is fully adjustable for horizontal, vertical or angled feeder position  
Feeder body, column base and joints are cast iron for heavy duty operation  
Rollers can be changed out easily and quickly 		Powered by a heavy duty 1HP, 1Ph, 115/230V TEFC motor for the big jobs  
Head mounted dual laser guide system provides a consistent drilling cross point on workpiece  
A new, larger table system with dual extensions for the largest woodworking table on the market; features twin T-slot grooves for a miter gauge or other homemade jigs  
Built-in dual LED work light eliminates cast shadows  
Newly designed table tilts 90° and has a positive stop at 0°  
Large handle makes lowering and raising the table easy  
Feed handles can be mounted on either side of the drill press for convenient handle positioning  
Variable speed system adjusts quickly and easily in one full range  
Front mounted digital LED display shows spindle speed  
Lighted push button switch with safety key is located on the front of the head for ease of use  
5/8" Keyless chuck for no-hassle bit changes  
Depth stop is designed for quick setting  
Adjustable split fence with dust collection port keeps work area clean
PM1900 Dust Collector, 3HP 1PH, with Canister Kit PF-41 Powerfeeder, 1HP, 1Ph, 115V, 4-Speed, 4 Wheel
Reg. Price: $1,657.00
Sale Price: $1,199.00
You save $458.00!
Reg. Price: $1,479.00
Sale Price: $1,199.99
You save $279.01!
Remote-controlled digital timer can be programmed for up to 99 minutes  
2-micron canister filter offers over six times filtering surface area of standard bags  
All-metal duct construction for rigidity and improved air flow  
The large impeller is powered by a 3HP motor for peak performance  
Triple 4” dust ports allow for several hoses to be attached at the same time  
Collection bags use a snap ring for rapid installation/removal  
10 cubic feet collection bag capacity reduces number of bag changes.  
Four swivel casters for shop maneuverability  
Standard Equipment:  
3HP TEFC motor  
Remote control  
Magnetic starter  
2 Canister filters  
2 Clear collection bags  
Swivel casters  
Triple 4” dust port 		Roller chain and sprockets provide positive feeding for a variety of work  
Support column is fully adjustable for horizontal, vertical or angled feeder position  
Feeder body, column base and joints are cast iron for heavy duty operation  
Rollers can be changed out easily and quickly
PM1900 Dust Collector, 3HP 3PH, with Canister Kit PWBS-14CS 14" Band Saw
Reg. Price: $1,653.00
Sale Price: $1,199.99
You save $453.01!
Reg. Price: $1,463.00
Sale Price: $1,199.99
You save $263.01!
2-micron canister filter offers over six times filtering surface area of standard bags  
All-metal duct construction for rigidity and improved air flow  
Powerful 3HP motor powers the large impeller for peak performance  
Triple 4” dust ports allow for several hoses to be attached at the same time  
Quick connect collection bags don’t require straps  
10 cubic feet capacity reduces number of bag changes.  
Four swivel casters make the unit easy to maneuver around the shop  
Standard Equipment:  
3HP TEFC motor  
2 Canister filters  
2 Clear collection bags  
Swivel casters  
Triple 4” dust port 		CARTER™ quick tension lever speeds blade changes, and the de-tension setting extends blade life during non-use  
Extra-large, two piece cast iron table consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20"  
Chip blower ensures a clean, visible cut line
Exclusive design, quick-release precision T-square style rip fence with 4" resaw attachment  
Precision balanced, nine spoke cast iron wheels reduce vibration  
Easy to read tensioning gauge settings indicated in "blade width" increments  
Full 6" under guide capacity with 13-1/2" width capacity  
60 watt adjustable lamp built into the body provides direct light on blade and work piece while cutting (bulb not included)  
Rigid one-piece welded stand requires no assembly
719T Tilt Table Mortiser with Stand Model 31A, 6" x 48" Belt, 1.5HP 1PH 115/230V
Reg. Price: $1,510.00
Sale Price: $1,249.99
You save $260.01!
Reg. Price: $1,466.00
Sale Price: $1,274.99
You save $191.01!
Sturdy cast iron construction with precision-machined column and table  
Quick position table mounted swiveling vise clamp accommodates angled work pieces  
Feed lever features size positions allowing for quick adjustments  
Table and fence tilt from 0 to 35° for angled mortises  
Gas cylinder controlled rack and pinion system for smooth head raising and lowering  
Hinged chuck door allows easy access for quick bit changes  
Quick adjust depth stop for uniform mortise depths  
Provided 5/8", 3/4" and 1-1/8" bushings allow multiple chisel shank sizes  
Handwheels control smooth linear and cross table motions  
Adjustable work stop for repeat cuts 		Multi-position belt head locks at any angle from 0° to 90°; includes indexing pin for 0, 45°, and 90° stops  
Belt and disc tables are precision ground cast iron with miter slots  
Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding  
Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support  
12" disc is balanced for flat, even coverage
Model 31A, 6" x 48" Belt, 2HP 3PH 230/460V 54HH 6" Jointer with helical cutterhead
Reg. Price: $1,466.00
Sale Price: $1,274.99
You save $191.01!
Reg. Price: $1,691.00
Sale Price: $1,399.99
You save $291.01!
Multi-position belt head locks at any angle from 0° to 90°; includes indexing pin for 0, 45°, and 90° stops  
Belt and disc tables are precision ground cast iron with miter slots  
Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding  
Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support  
12" disc is balanced for flat, even coverage 		Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems  
66" long adjustable infeed and outfeed tables provide more working surface  
Fine/quick adjustment lever on infeed table for precision cuts  
Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts  
Enlarged sheet metal stand provides a sturdy base  
1HP motor offers plenty of power  
Fence controls are center-mounted for convenience  
Push button switch is lockable to prevent accidental starting  
4" port for dust collection
PJ882, 8" Parallelogram Jointer 2HP,1Ph 209, 20" Planer, 5HP 3PH 230/460V
Reg. Price: $2,657.00
Sale Price: $2,199.99
You save $457.01!
Reg. Price: $3,360.00
Sale Price: $2,749.99
You save $610.01!
Extra long 82" table for expanded work support  
Parallelogram design helps maintain table parallelism and eases table raising and lowering  
Handwheel with worm gear system for precise fence tilting (Patented)  
1/8" depth of cut limiter for fast table positioning  
High-mount switch for operator convenience  
No-mar fence insert protects table 		5HP motor and 20" planing capacity for heavy duty work  
Fully enclosed base cabinet with integrated casters for shop mobility  
Cast iron table with extensions creates a big 55-1/2" x 20" working area  
Four feed speeds - 24 and 31 FPM, 16 and 20 FPM with gear change - provide versatility  
Feed rollers and cutterhead supported by full cast iron head assembly for rigidity  
Standard Equipment:  
Single-sided knives  
5" diameter dust port  
Cast iron extension tables  
Knife setting gauge