Join our mailing list!
You are here: Home > Woodworking > Tablesaws
Find by Pricing
Below 1700 (6)
1700 to 2399.99 (3)
2400 to 2999.99 (7)
3000 and Above (11)
Sort By:
Page of 2
10" Jobsite Table Saw w/ Stand JPS-10: 10" ProShop 1-3/4HP 30" Saw
List Price: $799.00
Reg. Price: $799.00
List Price: $1,208.00
Reg. Price: $1,208.00
Easy folding stand for convenient storage, quick setup and portability on the job site  
Rubber hand grips on each end of the table allow you to conveniently carry without stand  
Unique base design allows for adequate tool storage on the job site  
Heavy Duty 15 Amp motor with soft start  
Large telescoping extension wing provides a wide 25" ripping capacity  
Unique dust shroud design enhances dust and chip removal 		The new JET® ProShop Table Saw features the details you've come to expect from a high end cabinet saw; in the compact design of a contractor-style saw. What ever your current or future shop needs, the ProShop 10" Table Saw offers you the choice of a saw that will work for you for decades to come.
JPS-10: 10" ProShop 1-3/4HP 30" Cast Wings JPS-10XL52SW: 10" ProShop 1-3/4HP 52" Rip Cap.
List Price: $1,329.00
Reg. Price: $1,329.00
List Price: $1,449.00
Reg. Price: $1,449.00
The new JET® ProShop Table Saw features the details you've come to expect from a high end cabinet saw; in the compact design of a contractor-style saw. What ever your current or future shop needs, the ProShop 10" Table Saw offers you the choice of a saw that will work for you for decades to come The new JET® ProShop Table Saw features the details you've come to expect from a high end cabinet saw; in the compact design of a contractor-style saw. What ever your current or future shop needs, the ProShop 10" Table Saw offers you the choice of a saw that will work for you for decades to come.
JPS-10XL50CW: 10" ProShop 1-3/4HP 52" Rip Cast Wings Saw Trax Basic Panel Saw
List Price: $1,691.00
Reg. Price: $1,691.00
List Price: $1,699.00
Reg. Price: $1,699.00
The new JET® ProShop Table Saw features the details you've come to expect from a high end cabinet saw; in the compact design of a contractor-style saw. What ever your current or future shop needs, the ProShop 10" Table Saw offers you the choice of a saw that will work for you for decades to come.
JTAS-10XL50-1PK XactaSaw DELUXE XACTA SAW 3HP, 1Ph, 30" Rip
List Price: $2,657.00
Reg. Price: $2,657.00
Sale Price: $2,149.99
You save $507.01!
List Price: $2,718.00
Reg. Price: $2,718.00
Sale Price: $2,249.99
You save $468.01!
3HP, 1PH
Left with 50" Rip with Downdraft Table
Cast iron wings for a large, flat work surface
Powerful motor makes even the toughest cutting jobs a breeze
3 matched V-belts deliver full power to the blade
Rail-mounted magnetic switch is easy to reach and provides overload protection
1 piece closed stand channels dust through a 4" port for fast, clean dust collection
Hinged motor cover on cabinet gives quick access to the motor and belts 		If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET 10" DELUXE XACTA SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.
DELUXE XACTA SAW 3HP, 1Ph, 50" Rip JTAS-10XL50-1PK, 3HP, 1Ph XACTASAW Left with 50" Fence, Table and Legs
List Price: $2,898.00
Reg. Price: $2,898.00
Sale Price: $2,399.99
You save $498.01!
List Price: $2,415.00
Reg. Price: $2,415.00
If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET 10" DELUXE XACTA® SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage. EXCLUSIVE 50" commercial XACTA® Fence II with T-square design  
Cast iron wings to increase work surface and support area
Three matched V-belts deliver full power to the blade  
Rail-mounted magnetic switch is easy to reach and provides overload protection
XACTASAW Deluxe 5HP, 1 ph, 30" rip fence Saw Trax Basic Panel Saw
List Price: $3,080.00
Reg. Price: $3,080.00
Sale Price: $2,449.99
You save $630.01!
List Price: $2,599.00
Reg. Price: $2,599.00
EXCLUSIVE 30" Commercial XACTA® Fence II with T-square design  
Quick release riving knife greatly reduces binding/kickback risk  
Push button arbor lock (patent pending) for rapid blade change  
Shrouded Blade increases dust collection efficiency  
Standard 11" left and right cast iron extension wings provides the largest table surface in its class  
Poly-V drive belt system delivers efficient, quiet operation 		52", 64", 76", 88", 100" Cross Cut
Rip Cut Either Direction
True Bearing system, not a U-bolt with plastic rings
Can use Router in Same Carriage
Bevel Cut to 45 Degrees
Control or Vary Depth of Cut
2 Carriage locks ensure  no play when ripping
Easily Expandable Frame
DELUXE XACTA SAW 5HP, 1Ph, 50" RIP PM2000, 3HP 1PH Table Saw, w/ 30" Accu-Fence
List Price: $3,140.00
Reg. Price: $3,140.00
Sale Price: $2,599.99
You save $540.01!
Reg. Price: $3,502.00
Sale Price: $2,899.99
You save $602.01!
If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET® 10" DELUXE XACTA® SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA® SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26" x 30" wings and deeper table gives you even more cast iron to work on. A built-in 12.5" x 18" x 4 " storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.
PM2000, 3HP 1PH Table Saw, w/ 50" Accu-Fence System PM2000, 5HP 3PH Table Saw, with 50" Accu-Fence System
Reg. Price: $3,623.00
Sale Price: $2,999.99
You save $623.01!
Reg. Price: $3,623.00
Sale Price: $2,999.99
You save $623.01!
The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration.
SawStop 10" Table Saw JTAS-10XL50-1PK XactaSaw
List Price: $3,099.00
Reg. Price: $3,099.00 		1-800-582-7229
List Price: $3,140.00
Reg. Price: $3,140.00
Motor: 3 hp, 1ph, 230V, 13 A The 10” SawStop® Industrial Cabinet Saw has everything you’d want in a saw: precision, heavy-duty construction, a dust collection system that’s second-to-none, plus the revolutionary safety feature that’s made SawStop famous.
Note: With the purchase of any SawStop tablesaw, there is a $400 inbound freight charge.
 
TO SEE A DEMONSTRATION VIDEO, CLICK HERE!
 		3HP, 1PH
Deluxe Left with 50" Rip and Downdraft Table
Cast iron wings for a large, flat work surface
Powerful motor makes even the toughest cutting jobs a breeze
3 matched V-belts deliver full power to the blade
Rail-mounted magnetic switch is easy to reach and provides overload protection
1 piece closed stand channels dust through a 4" port to fast, clean dust collection
Hinged motor cover on cabinet gives quick access to the motor and belts
PM2000, 3HP 1PH Table Saw, with 30" Accu-Fence System and Rout-R-Lift PM2000, 3HP 1PH Table Saw, w/ 50" Accu-Fence System & Rout-R-Lift
Reg. Price: $3,864.00
Sale Price: $3,199.99
You save $664.01!
Reg. Price: $3,985.00
Sale Price: $3,299.99
You save $685.01!
The award winning PM2000 table saw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration.